blog
Electric or Water Underfloor Heating: Questions for Your Floor Specification
The cover image is illustrative, not a documented Puur project.
Choosing heating involves the building’s heat demand, available energy source, controls and floor construction. The flooring finish is one part of that design, rather than a shortcut to predicting running costs.
Ask the heating designer for calculations
Compare proposed output, design temperatures, control strategy and expected use for the actual rooms. Avoid universal claims that one heating type always warms faster or costs less.
Identify every floor layer
Ask for the insulation, heating, screed or board system, adhesive where relevant, and decorative finish to be shown in one build-up. Confirm that the selected products are compatible rather than assuming a finish can go directly over pipes or mats.
Check the finish’s data
Puur PSR is a cementitious overlay, distinct from a structural concrete slab or resin coating. Request the relevant product information for the heating calculation; a polished appearance alone does not establish thermal performance.
Agree commissioning and handover
Use the heating, screed and flooring suppliers’ written procedures for testing, drying, installation and restart. Puur can discuss the proposed finish, while heating design and installation responsibilities should remain clearly allocated.
Discuss your project with Puur
Send plans, photographs of the existing base, intended use and any heating details. We can discuss the finish, samples and the information needed before agreeing a specification.
Ask Puur about your floor · View Puur PSR specification information
Frequently Asked Questions
Ask the heating designer for calculations — what should I establish?
Compare proposed output, design temperatures, control strategy and expected use for the actual rooms. Avoid universal claims that one heating type always warms faster or costs less.
Identify every floor layer — what should I establish?
Ask for the insulation, heating, screed or board system, adhesive where relevant, and decorative finish to be shown in one build-up. Confirm that the selected products are compatible rather than assuming a finish can go directly over pipes or mats.
Check the finish’s data — what should I establish?
Puur PSR is a cementitious overlay, distinct from a structural concrete slab or resin coating. Request the relevant product information for the heating calculation; a polished appearance alone does not establish thermal performance.
Agree commissioning and handover — what should I establish?
Use the heating, screed and flooring suppliers’ written procedures for testing, drying, installation and restart. Puur can discuss the proposed finish, while heating design and installation responsibilities should remain clearly allocated.
